VM Hardware
SKIL RT1323-01 Router Table and Fixed Base Router Combo Kit
SKIL RT1323-01 Router Table and Fixed Base Router Combo Kit
Couldn't load pickup availability
SKIL RT1323-01 Router Table and Fixed Base Router Combo Kit
SKIL 10 AMP Fixed Base Router (RT1323-00) Speed control dial provides the right speed for the material, and LED lights on the motor base illuminates the work area. Its ergonomic handles and tough die-cast motor housing makes this perfect for routing with both 1/2 in. and 1/4 in. shank router bits. The 10 Amp Fix Base Router's 1-3/4 HP motor cuts through soft and hard woods as well as plastic, and is also equipped with a live tool safety indicator, three LED lights, soft start with 6-speed variable control, quick-set screws for fixing the edge guide, and a built-in vacuum port.
SKIL Router Table (SRT1039) Compatible with many major router brands, the SKIL SRT1039 Router Table brings convenience to the job. Get started with the quick and easy router clamp that attaches your router to the underside of the table. With the above table router lift, you'll get convenient access to adjust the height of the router bits without reaching underneath the table. This router table is also equipped with a dual-sided integrated router bit storage system to store all your bits in a central location.
What's Included:
Router (RT1323-00), Router Table (SRT1039)
Features
- ROUTER TOOL COMBO KIT - Includes SKIL Router Table (SRT1039) and SKIL 10 Amp Fixed Base Corded Router (RT1323-00).
- SKIL ROUTER TABLE - Equipped with Above the Table Adjustment, Integrated Bit Storage, Aluminum Mite Gauge Slot, Router Clamp, Starter Pin, and Two Featherboards for precise routing
- SKIL 10 AMP FIXED BASE ROUTER - Powerful 10 Amp, 2.0 HP motor provides smooth and accurate routing from start to finish; equipped with soft start, speed control, and a live tool indicator
- LARGE ALUMINUM FENCE - The aluminum fence measures 24 inches wide and is complete with adjustable MDF face plates and a starter pin and guard for smooth operation with taller work pieces
- DURABLE & ERGONOMIC - Die-cast motor housing and shaped handles provide superior grip and control.
- CONVENIENCE - Gain convenient access to router bits with Above the Table Adjustment and Integrated Bit Storage, and use the Router Clamp to quickly attach tools under the table
Specs
- Fixed Base Router
- Collet Size: 1pc 1/4 IN. and 1pc 1/2 IN. collet
- No Load Speed: 10,000-25,000 rpm
- Power: 10 Amps
- Tool Height (inch): 9-1/4
- Tool Length (inch): 10
- Tool Weight (pound): 8
- Tool Width (inch): 6
- Router Table
- Fence Material: Plastic+Aluminum+MDF
- Table Material: MDF
- Table Size (inch): 26x16
- Tool Height (inch): 18
- Tool Length (inch): 26
- Tool Width (inch): 16
- DOWNLOAD MANUAL (PDF)
- GET PARTS LIST (PDF)
Shipping & Returns
Shipping & Returns
Shipping on most orders in 24-48 hours special orders can be 2-3 days. Returns see Returns Policy.
We have a 30-day return policy on most products, which means you have 30 days after receiving your item to request a return. Some products carry a longer manufacture warranty please contact us if you have questions about items.
To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at overthehilltractor@gmail.com. Please note that returns will need to be sent to the following address: 2005 Stuarts Draft Hwy, Stuarts Draft, VA 24477
If your return is accepted at damage or defective, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
If your return is due to no longer needed, wrong size order, ordered by mistake, found better pricing, etc the customer is responsible for the return shipping cost.
Any item returned over $50 cost we suggest insurance on package.
You can always contact us for any return question at overthehilltractor@gmail.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, we can only give 72 hours from time package is scanned delivered to accept claims. Please contact within 72 hours of delivery so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, like fuel related items due to hazardous materials shipping regulations. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Electrical parts can only be returned if new and in original condition, Used electrical parts are not returnable unless actually defective, contact us with details.
Unfortunately, we cannot accept returns on sale items or gift cards.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at overthehilltractor@gmail.com.
Most items are covered by 30 day warranty, Fuel Related parts are only covered against actually manufacture defect since the fuel produced today breaks down gaskets and seals quickly. Electrical parts can only be returned if new and in original condition, Used electrical parts are not returnable unless actually defective, contact us with details. Returns are handled on each individual item, some items will not require return for refund just that customer submit picture of proof of issue. Please contact us with questions about returns.
-
Free Shipping
Free shipping on orders over $150
-