Bull Boost Performance
K20 K24 K-Series Tucked Engine Harness For Honda Acura K-Swap RSX Civic Si EP3
K20 K24 K-Series Tucked Engine Harness For Honda Acura K-Swap RSX Civic Si EP3
Couldn't load pickup availability
- K-Swap Cars
- 02-04 RSX Type S
- 02-04 RSX Base
- 01-05 Civic EP3 (Type S or K24 Swap)
Note:
*New design uses factory RSX connectors.
*Will NOT fit RHD cars or RWD cars.
Our Tucked Engine Harness is designed as a high quality replacement 02-04 RSX Type-S harness that offers a super clean look. We have made the harness with lots of features so it will work with nearly all K-Series engine swaps and the 02-04 RSX Type S. It includes all the necessary plugs with a handful of extras (Fan Switch, IACV, Temp Sensor, ETC). We used only SAE certified automotive grade wiring resistant to moisture and most solvents to ensure quality and durability. High quality military grade heat shrink loom is used to cover entire harness which is resistant to gas and diesel. It is rated for -55° C to 150° C (-67° F to 320° F). We have also used a popular and clean tucked wire layout. The main harness runs over the valve cover and even hides the injector plugs, which come up from under the manifold. RDX injector plugs come with all harnesses. The pins on RDX injector plugs can be fitted into the oem RSX Type S 310cc plugs which makes switching quick and simple. Charge harness is non integrated. We used a thin, but high grade power wire to help keep the overall size down. On swap chassis, the power wire will work with fuse box in factory location or relocated under the dash. Separate power wire is available for other chassis and those that prefer to run their own charge wiring. Everything is labeled clearly to ensure a simple installation and no confusion.
Features:
- All plugs included except EVAP and AC
- Covering is gas and diesel resistant and rated for -55° C to 150° C (-67° F to 320° F)
- SAE Certified Automotive Grade Wiring
- All plugs are labeled
- Tucked design
- Harness runs over valve cover (Can be covered with coil pack cover)
- Integrated power wire and charge harness. Works with fuse box in stock location or relocated under dash.
- Injector wiring runs from under manifold between middle runners.
- Ground wire relocated to stud under coil pack cover (instead of front of the valve cover)
- Includes single wire temp sensor wire (For k-swap cars stock cluster)
- 3 Aux wires run from ECU to under intake manifold. Two ECU pins pre-installed.
- Wiring long enough for both VSS low frequency or high frequency (High Frequency transmissions will require repining plug and slight modification to VSS)
- Extra knock sensor plug included.
- Each harness is inspected and tested before shipping.
-
RSX injectors plugs come standard (RDX injectors can be easily switched)
Shipping & Returns
Shipping & Returns
Shipping on most orders in 24-48 hours special orders can be 2-3 days. Returns see Returns Policy.
We have a 30-day return policy on most products, which means you have 30 days after receiving your item to request a return. Some products carry a longer manufacture warranty please contact us if you have questions about items.
To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at overthehilltractor@gmail.com. Please note that returns will need to be sent to the following address: 2005 Stuarts Draft Hwy, Stuarts Draft, VA 24477
If your return is accepted at damage or defective, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
If your return is due to no longer needed, wrong size order, ordered by mistake, found better pricing, etc the customer is responsible for the return shipping cost.
Any item returned over $50 cost we suggest insurance on package.
You can always contact us for any return question at overthehilltractor@gmail.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, we can only give 72 hours from time package is scanned delivered to accept claims. Please contact within 72 hours of delivery so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, like fuel related items due to hazardous materials shipping regulations. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Electrical parts can only be returned if new and in original condition, Used electrical parts are not returnable unless actually defective, contact us with details.
Unfortunately, we cannot accept returns on sale items or gift cards.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at overthehilltractor@gmail.com.
Most items are covered by 30 day warranty, Fuel Related parts are only covered against actually manufacture defect since the fuel produced today breaks down gaskets and seals quickly. Electrical parts can only be returned if new and in original condition, Used electrical parts are not returnable unless actually defective, contact us with details. Returns are handled on each individual item, some items will not require return for refund just that customer submit picture of proof of issue. Please contact us with questions about returns.
-
Free Shipping
Free shipping on orders over $150
-