Skip to product information
1 of 9

Hipa Store

Hipa GX160 GX200 Dual Fuel Carburetor for HONDA GX 160 GX 200 Gasoline/LPG Conversion Kit 2KW 2.8KW 170F Generator Water Pump

Hipa GX160 GX200 Dual Fuel Carburetor for HONDA GX 160 GX 200 Gasoline/LPG Conversion Kit 2KW 2.8KW 170F Generator Water Pump

Regular price $31.89 USD
Regular price Sale price $31.89 USD
Sale Sold out
Shipping calculated at checkout.

Model Fit & Replacement Parts Guide


Applicaton:

This product is dual fuel carburetor, fuel can be auto-switching. Corresponding fuel combination is gasoline/Liquefied petroleum gas(LPG), gasoline/natural gas(NG). When two kinds of fuel supplied at the same time, carburetor will use LPG/NG firstly. Internal gasoline supply system will be cut off automatically.

LPG/NG start-up steps

1. Connect the gas source and carburetor fuel valve inlet air tube(A) with fuel rubber tube(Remove the sealing cap(B) and connect the rubber tube)

2. Turn off the choke valve(C) (Push the choke arm(D) to the right)

3. Press the enrichment button(E) for 1-2 seconds

4. Start the engine, after running for 3-5 seconds, turn off the choke valve(C) slowly (push the choke arm(D) to the left)

Attention: If failed to start the engine for twice, please turn on the choke valve(C) (push the choke arm(D) to the left),then starting the engine again.

Gasoline start-up steps

1. Turn on the carburetor fuel button

2. Turn off the carburetor choke valve(C) (push the choke arm(D)to the right)

3. Start the engine, after running for 3-5 seconds, turn on the choke valve(C) slowly (push the choke arm(D) to the left)

Attention: If failed to start the engine for twice, please turn on the choke valve(C) (push the choke arm(D) to the left), then starting the engine again.


Attention:

1. The carburetor main air supply adjustment screw(F) and the idle LPG/NG compensation adjustment screw(G) are pre-adjusted by manufacturer. (Any adjustments only allowed by Professionals.)

2. If the carburetor is not used for a long time, please turn on the drain valve(H) to clean the storing gasoline in the float bowl; Otherwise, it will ruin the ruin the carburetor.

How to Remove Carburetor float bowl for cleaning

1. Remove the pressure chamber cover fastening screw(I).

2. Remove the pressure chamber diaphragm sub-assembly(J).

3. Remove the float bowl connection bolts(K).

4. Remove the float bowl sub-assembly(L).

Shipping & Returns

Shipping on most orders in 24-48 hours special orders can be 2-3 days. Returns see Returns Policy.

We have a 30-day return policy on most products, which means you have 30 days after receiving your item to request a return. Some products carry a longer manufacture warranty please contact us if you have questions about items.

To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at overthehilltractor@gmail.com. Please note that returns will need to be sent to the following address: 2005 Stuarts Draft Hwy, Stuarts Draft, VA 24477

If your return is accepted at damage or defective, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

If your return is due to no longer needed, wrong size order, ordered by mistake, found better pricing, etc the customer is responsible for the return shipping cost.

Any item returned over $50 cost we suggest insurance on package.

You can always contact us for any return question at overthehilltractor@gmail.com.

Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, we can only give 72 hours from time package is scanned delivered to accept claims. Please contact within 72 hours of delivery so that we can evaluate the issue and make it right.

Exceptions / non-returnable items
Certain types of items cannot be returned, like fuel related items due to hazardous materials shipping regulations. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Electrical parts can only be returned if new and in original condition, Used electrical parts are not returnable unless actually defective, contact us with details.

Unfortunately, we cannot accept returns on sale items or gift cards.

Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at overthehilltractor@gmail.com.

Most items are covered by 30 day warranty, Fuel Related parts are only covered against actually manufacture defect since the fuel produced today breaks down gaskets and seals quickly. Electrical parts can only be returned if new and in original condition, Used electrical parts are not returnable unless actually defective, contact us with details. Returns are handled on each individual item, some items will not require return for refund just that customer submit picture of proof of issue. Please contact us with questions about returns.

View full details
  • Free Shipping

    Free shipping on orders over $150

  • Returns

    See Returns Policy Page

    Returns Policy