Skip to product information
1 of 10

Bull Boost Performance

Gen II 2 GTX3582R GT35 T4 .82AR Turbine Housing Dual Ceramic Ball Bearing Turbo

Gen II 2 GTX3582R GT35 T4 .82AR Turbine Housing Dual Ceramic Ball Bearing Turbo

Regular price $962.41 USD
Regular price $1,137.41 USD Sale price $962.41 USD
Sale Sold out
Shipping calculated at checkout.
Billet Wheel Dual Ball Bearing Turbo GT35 GTX3582R T4 .82 A/R Vband Clamp 4 Bolt

Specification:
 
Billet Compressor wheel: 63.5mm/84mm
Compressor Housing: 0.72 A/R Anti-Surge, 4" Inlet, 2.5" Outlet
Turbine wheel: 68mm/62.3mm
Stainless Steel Turbine housing: V Band Inlet, V-Band outlet(ID roughly 3'', OD roughly 3.5'')A/R 0.82

Fit Vehicle: Universal turbo for performance use, racing car etc.

Fit engine displacement 2.0-4.5L and typically good for around 600HP-850HP. Fit engine displacement 4.0-8.0L 
for twin turbo applications and up to 1200HP.

Recommended boost pressure are 0.5Bar(7psi) to 1.5Bar(21psi), if boost pressure higher than 2Bar, 
it will significantly reduce the turbo lifespan and may result in damaging of your engine.


What can you benefit from our Dual Ball Bearing turbocharger?

Reduced Turbo Lag:
Dual Ball Bearing turbochargers can spool up about 15% faster than traditional journal bearings, so it will significantly reduce the turbo lag when the throttle is suddenly opened. This produces an improved response that can be converted to a quicker 0-60 mph speed. In fact, when you drive with a dual ball bearing turbocharged engine, it will more like driving a big, normally aspirated engine.

Reduced Oil Flow:
The Dual Ball Bearing design reduces the required amount of oil required to provide adequate lubrication. This lower oil volume reduces the chance for seal leakage. Also, the dual ball bearing is more tolerant of marginal lube conditions, and diminishes the possibility of turbocharger failure upon engine shut down.

Improved Rotordynamics and Durability:
The Dual Ball Bearing cartridge gives better damping and control over shaft motion, allowing enhanced reliability for both everyday and extreme driving conditions. In addition, the opposed angular contact bearing cartridge eliminates the need for the thrust bearing commonly a weak link in the turbo bearing system.


What can you benefit from our Forged Billet Compressor Wheel?

Stronger Wheel:
By using forged billet aluminum to make the wheel, there is no chance of minute air bubbles being in the mental. So, you don't need to worry about porosity issues. That means billet compressor wheel is much stronger than cast compressor wheels.

Better Blades Design:
By using forged billet aluminum and machined on a 5-Axis mill, the billet compressor wheel can be designed much more aggressively, the nose and hub can be designed significantly smaller to allow for a greater blade diameter. And the blades can be made much more complicated to increase blade surface area, which can flow more air into the engine.

Lower Engine Intake Air Temperature:
By using forged billet aluminum, the wheel can be machined much thinner. This allows the wheel to have a greater efficiency range, because their is less blade thickness to contact the air and heat it up. It also means that with less blade thickness and lower hub area that there is a greater area in-between the blades to squeeze more air and build boost pressure. The more efficient a wheel is the lower the intake temps, and everyone knows the cooler the air going into the engine the more horsepower you can make!

Shipping & Returns

Shipping on most orders in 24-48 hours special orders can be 2-3 days. Returns see Returns Policy.

We have a 30-day return policy on most products, which means you have 30 days after receiving your item to request a return. Some products carry a longer manufacture warranty please contact us if you have questions about items.

To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at overthehilltractor@gmail.com. Please note that returns will need to be sent to the following address: 2005 Stuarts Draft Hwy, Stuarts Draft, VA 24477

If your return is accepted at damage or defective, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

If your return is due to no longer needed, wrong size order, ordered by mistake, found better pricing, etc the customer is responsible for the return shipping cost.

Any item returned over $50 cost we suggest insurance on package.

You can always contact us for any return question at overthehilltractor@gmail.com.

Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, we can only give 72 hours from time package is scanned delivered to accept claims. Please contact within 72 hours of delivery so that we can evaluate the issue and make it right.

Exceptions / non-returnable items
Certain types of items cannot be returned, like fuel related items due to hazardous materials shipping regulations. We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Electrical parts can only be returned if new and in original condition, Used electrical parts are not returnable unless actually defective, contact us with details.

Unfortunately, we cannot accept returns on sale items or gift cards.

Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at overthehilltractor@gmail.com.

Most items are covered by 30 day warranty, Fuel Related parts are only covered against actually manufacture defect since the fuel produced today breaks down gaskets and seals quickly. Electrical parts can only be returned if new and in original condition, Used electrical parts are not returnable unless actually defective, contact us with details. Returns are handled on each individual item, some items will not require return for refund just that customer submit picture of proof of issue. Please contact us with questions about returns.

View full details
  • Free Shipping

    Free shipping on orders over $150

  • Returns

    See Returns Policy Page

    Returns Policy